General-tools-and-instruments DCS1100 Bedienungsanleitung PDF herunterladen (Seite 8)

To magnify (zoom in on) the display by a factor of 50% (1.5X zoom), press

the button. The display will show a magnified version of the live video seen

by the probe, and the word “ZOOM” will appear on the bottom of the display for

five seconds.

To zoom out to the default size,

press the button again. The

display will revert to its previous

size and the word “NORMAL” will

appear on the bottom of the

display for five seconds.

The button has a second function: mirroring the live video feed. The ability

to mirror video is useful only when it is necessary to read text (such as a serial

number) using an optional high-performance probe outfitted with a mirrored

viewing tip. The effect of the double mirroring is to make the text readable,

as shown below.

To mirror the video feed, press the button, hold it for three seconds, and

then release the button. The live video feed will then switch to a mirror image

of itself with the letter “M” at the top right of the screen. The mirroring and

the “M” will remain until the next time the button is pressed and held for

three seconds.

To view the video from the camera probe on a larger display, such as a

television or computer monitor, plug the mini-stereo plug at one end of the

supplied video cable into the AV out jack (labeled “TV”) on the top of the

DCS1100. Plug either the yellow or white RCA plug at the other end of the cable

into the “Video In” jack of your TV or monitor. The video will appear both on the

TV or computer monitor and on the DCS1100’s display. The only difference

between the two displays is that video sent to an external monitor cannot be

zoomed or mirrored.

1 2 3 4 5 6 7 8 9 10 11 12

Keine Kommentare

General-tools-and-instruments DCS1100 Bedienungsanleitung Seite 8