General-tools-and-instruments DCT2001 Bedienungsanleitung PDF herunterladen (Seite 10)

Use the

" up Button ( A Button ) " ( 3-5, Fig. 1 ),

" left Button ( B Button ) " ( 3-6, Fig. 1 )

" down Button ( C Button ) " ( 3-7, Fig. 1 )

to select the desired value of Temperature

Compensation factor.

c. Once the desired value is reached, push the " Temp.

C Button ( D Button ) " ( 3-8, Fig. 1 ) to set the new

value.

5) Select the applicable range, by using the " Range Button

( B Button ) " ( 3-6, Fig. 1 ).

* If the display shows "- - - -", it indicates an overload

condition, select the next higher range.

* If the display shows "_ _ _ _", it indicates an

out-of-range condition, select the next lower range.

6) Immerse the head of " Conductivity/TDS Probe " ( 3-17, Fi

. 1

)

into the solution, up to the immersion level.

)

During the measurement, the lower LCD Display will

show the temperature of the solution.

* Push the " 蚓/蚌 Button " ( 3-5, Fig. 1 ) to change

the temperature display unit from " 蚓 to 蚌 "

or " 蚌 to 蚓 ".

4-2 TDS measurement

The operation procedures are same as the above 4-1,

except that push the " CD/TDS " Button ( C Button ) ( 3 -7,

Fig. 1 ), and select the function to the TDS measurement. The

lower display will show the text of " P ".

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 20 21

Keine Kommentare

General-tools-and-instruments DCT2001 Bedienungsanleitung Seite 10