PIN/PINLESS DEEP SENSING MOISTURE METERWITH SPHERICAL SENSOR AND REMOTE PROBEUSER’S MANUALMMD950Please read this manual carefully and thoroughly befor
The table below details the five function options available to you in Setup mode. Function Option No. Setting Action (
To change any setting, use the Mode button to cycle through the choices (0 or 1 for Options 0, 3 and 4; 0, 1, 2 or 3 for Options 1 and 2). When the se
If either calibration check produces a non-zero reading for 10 seconds, and themeter is still under warranty, call General's Customer Service Dep
MAINTENANCE TIPSWhen the icon appears at the upper left of the LCD, it’s time to replacethe 9V battery that powers the meter (although measurements wi
RETURN FOR REPAIR POLICYEvery effort has been made to provide you with a reliable product of superiorquality. However, in the event your instrument re
NOTES_________________________________________________________________________________________________________________________________________________
GENERAL TOOLS & INSTRUMENTS80 White StreetNew York, NY 10013-3567PHONE (212) 431-6100FAX (212) 431-6499TOLL FREE (800) 697-8665e-mail: sales@gener
TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 – 5 Key Features . . . . . . . . . . . . . . . . . .
3INTRODUCTIONThank you for purchasing General Tools & Instruments’ MMD950 Pin/PinlessDeep Sensing Moisture Meter with Spherical Sensor and Remote
The distinction between absolute and relative readings is important tounderstand. The moisture level measurements made by the remote probe’s test pins
programmed to sound in different ways in response to different moisturelevels or operations. The correlations make it easy to use sight and/orsound to
PRODUCT OVERVIEWThe figure shows all of the controls, indicators and physical features on thefront, bottom, top, back and right side of the MMD950. Fa
A. Spherical sensorB. Measurement mode indicator (REL shown)C. Indicates beeper is enabledD. Indicates battery is weakE. Jumbo LCD display F.
To change the default settings for the beeper, backlight or auto power function,follow the Advanced Setup Instructions beginning on p. 9. At a minimum
Some measurement tips:1. The spherical sensor’s accuracy is not affected by its angle relative tothe target surface. Press the sphere against the mat
Kommentare zu diesen Handbüchern